Being a romantic at heart, I never pass up the chance to read a Nicholas Sparks book, watch a chick flick (much to my husband’s dismay), or make and send a hand-made Valentine. Well I realize I am probably the only one left in this century who even bothers to send something via the pony express, let alone actually make it first, I thoroughly enjoy the process (when time allows). I used to make something similar to these Valentine’s cards with my Mom and sister when I was younger and I always enjoyed how unique each one was from the different patterns of melted wax. They’re very easy to make, so I hope that means this year my cards will be getting some company on their pony express ride
DIY Valentine’s Day Cards
In addition to the above items, you will also need:
- Construction paper in Valentine’s colors
- Bakers twine
- Exacto knife
- Heart (or other festive shaped) stickers
- Fancy-edged scissors (optional)
1. Turn your iron on to preheat and set aside. Next, select an assortment of Valentine’s colored crayons.
2. On a thick board/protected surface, use your knife to cut off a small piece of crayon (cut from the non-pointy end so the crayon is still usable). After removing the paper wrapping, finely chop up the crayon in to pieces.
3. On a towel covered surface, lay out a square of wax paper. Cover with a small amount of the crayons (a little goes along way here). For a 6 x 6″ square of wax paper, I used about a teaspoon of crayon “crumbs”. Once you have the crayon pieces down, cover with another piece of wax paper.
4. Using your iron gently start tapping at the wax paper, barely touching the surface and only holding it down for a few seconds at a time. The wax will quickly melt, and as it does you can use the tip of the iron to gently “drag” the wax around the paper.
5. Continue on until you have used up all your crayon pieces; set aside to let everything harden and cool.
6. Meanwhile, make your cards out of construction paper with fancy-edged scissors. Then, using regular scissors, cut a “window” into the middle of the card. Next, cut small pieces of baker’s twine (mine were 1 1/2″ but the length will depend on the size of your “window”, card and heart shape, so adjust accordingly).
7. Once your wax paper has cooled, use your exacto knife or scissors to cut out heart shapes. You will need 2 hearts per card. To assemble the heart, cover one side in glue, place on the twine (as seen in the middle picture), then press down on top with another heart. Let it dry, then use your exacto knife to trim the hearts to the same shape and size.
8. To attach your heart to the card, open the card all the way up and lay it front side up. Align the heart to the position you want it in, then, using a small dab of glue, attach the string to the card. Firmly press a heart sticker over the end of the string. Set aside to dry.